Removing an old toilet
Removing an old toilet is a manageable task for DIYers and professionals alike. Whether upgrading to a new toilet or replacing an outdated or broken one, rest assured that you can handle this task.
Common Problems
- Broken wax seal
- Over time, the seal underneath toilets breaks down and degrades, leading to leaks.
- Broken components
- The pieces of the toilet can wear down over time, and they are connected directly to its mechanical components and functions.
- Outdated equipment
- Most older toilets use more water, leading to higher water bills.
Difficulty
While this task may seem daunting, it’s relatively straightforward. Most homeowners opt for professionals due to the time and strain required, but with the proper guidance, you can feel confident and capable of tackling this task yourself.
Time Needed
Cost Breakdown
Professional
Labor: $100 – $200
Total: $100 – $200
DIY
Tools: $20 – $50
Total For Homeowners without tools: $20 – $50
Difference
DIY Homeowner with tools saves: $100 – $200
DIY Homeowner without tools saves: $80 – $150
Tools and Supplies
Amazon Affiliate Links Listed Below
Explanation
Removing a toilet involves cutting the water supply off and draining the water. Then, it is detached from the floor, and its seal is removed from the sewer drain.
How It’s Done
- Turn off the water supply: Locate the water shutoff valve near the toilet base and turn it clockwise to stop the water flow.
- Drain the toilet and flush it to remove as much water as possible. Use rags to soak up any remaining water.
- Disconnect the Water Supply Line: Using pliers, loosen the plastic nut connecting the supply line to the bottom of the toilet tank (See Toilet Supply Line Set Up).
- Remove the Tank (If Needed). If removing the tank separately, unscrew the bolts, secure it to the bowl, and carefully lift it off.
- To unbolt the toilet from the floor. Remove the caps covering the floor bolts and use pliers to remove the nuts.
- Lift and remove the toilet from the toilet side to side to break the seal, then lift it straight up and move it aside.
- Using a putty knife, scrape the old wax seal from the flange. Ensure the area is clean before installing a new toilet.
- Stuff a rag into the drain opening until replacing the toilet to prevent sewer gases from escaping.
