Chipping, Repair, and When to Replace
Toilets can develop chips and cracks over time, leading to aesthetic issues and potential leaks. This guide will help you determine when a repair is sufficient and a complete replacement is necessary.
Common Problems
- Minor Chips and Scratches
- Small surface chips can be repaired with porcelain filler or epoxy, preventing further damage.
- Hairline Cracks
- Cracks can worsen over time; temporary fixes may help, but replacement is often necessary.
- Leaks from Cracks
- Water seeping from a crack indicates structural failure and requires replacement.
- Discoloration and Stains
- Surface stains can be treated, but deep staining may indicate long-term wear requiring replacement.
Difficulty
Repairing small chips is easy and cost-effective, while fixing cracks is more challenging. If the toilet is structurally compromised, replacement is the only solution.
Time Needed
Cost Breakdown
Professional
Parts: $20 – $200
Labor: $100 – $300
Total: $120 – $500
DIY
Parts: $20 – $200
Tools: $30 – $100
Total for homeowners without tools: $50 – $300
Difference
DIY Homeowner with tools saves: $100 – $300
DIY Homeowner without tools saves: $70 – $200
Tools and Supplies
Amazon Affiliate Links Listed Below
Explanation
The repair involves cleaning the chipped area, applying a filler, and smoothing it for a seamless finish. Sealants can temporarily fix cracks, but replacement is usually necessary to prevent leaks. Removing and installing a new toilet is the best solution for severe damage.
How It’s Done
- Clean the Area – Wipe the chipped or cracked area thoroughly with a dry cloth.
- Sand the Surface – Lightly sand around the damage for better adhesion.
- Apply Filler – Fill the chip with a porcelain repair kit or epoxy.
- Smooth and Dry – Smooth out the filler and let it dry completely.
- Seal if Necessary – Apply a waterproof sealant for additional protection.
- Check for Leaks – If repairing a crack, monitor for leaks. If leaks persist, replace the toilet.
- Replacement
