Removing Laminate on Stairs
Laminate flooring on stairs provides a durable and visually appealing surface that mimics hardwood without the high cost. It enhances traction while protecting the stair structure from daily wear and tear. Many homeowners choose laminate for its easy maintenance and ability to resist scratches, dents, and stains.
Common Problems
- Stubborn Adhesive
- Many laminate stair treads are glued down, making removal challenging.
- Nails and Staples Left Behind
- Underlayment or transition strips may be secured with nails or staples that must be removed.
- Subfloor or Stair Damage
- After removal, stairs may have dents, scratches, or uneven surfaces that require repairs before installing new material.
- Tricky Corner and Edge Removal
- Tight spaces along stair edges and risers can make prying up laminate tricky.
Difficulty
Removing laminate from stairs can be more complex than removing it from floors due to the smaller, more confined space and the potential use of strong adhesives. Floating laminate is easier to remove, while glued-down planks require more effort. Patience and the right tools are essential to avoid damaging the stair structure.
Time Needed
Cost Breakdown
Professional
Parts: $40 – $90
Labor: $250 – $500
Total: $290 – $590 For 12 Steps
DIY
Parts: $40 – $90
Tools: $75 – $200
Total for homeowners without tools: $115 – $290 For 12 Steps
Difference
DIY Homeowner with tools saves: $250 – $500 For 12 Steps
DIY Homeowner without tools saves: $0 – $300 For 12 Steps
Tools and Supplies
Amazon Affiliate Links Listed Below
Explanation
The process begins by determining whether the laminate is floating or glued down. Floating planks can be lifted with a pry bar, while glued laminate requires heating and scraping. Any nails, staples, or adhesive residue must be removed to prepare the stairs for refinishing or new flooring installation. Proper cleaning and inspection ensure a smooth and safe surface for the next step.
How It’s Done
- Prepare the Workspace
- Clear the Area: Remove any rugs, furniture, or obstacles near the staircase.
- Wear Protective Gear: Use gloves to protect hands and knee pads for comfort
- Vacuum the Stairs: This helps remove loose dirt and dust before starting.
- Remove Baseboards and Trim (If Applicable)
- Use a Pry Bar or Flathead Screwdriver: Gently wedge it under the baseboards or stair nosing (if applicable) to loosen them.
- Work carefully: Avoid damaging the wall or stair edges.
- Label and Store for Reuse: If planning to reinstall trim, store pieces safely.
- Determine the Type of Laminate Installation
- Floating Laminate (Easier to Remove): Not attached with glue, pieces snap together and can be pried apart easily.
- Glued-Down Laminate (Harder to Remove): Planks are secured with adhesive, requiring heating and scraping for removal.
- Removing Laminate Planks
- For Floating Laminate:
- Start at the Top Step: Locate an edge or loose plank.
- Use a Pry Bar or Hands: Gently lift the first plank from an open edge or corner.
- Continue downward: Remove one plank at a time, stacking them for disposal.
- Inspect for nails or staples: Use pliers to remove them if they are found.
- For Glued Laminate:
- Heat the Adhesive: Use a heat gun to soften the glue under each plank. Hold the heat gun a few inches above the plank for 30 – 60 seconds.
- Loosen the Plank: Use a floor scraper or pry bar to lift the softened plank from one end.
- Work in Small Sections: Gradually heat and scrape to prevent subfloor damage.
- Dispose of Planks Properly: Bag or stack the planks for removal.
- Start at the Top Step: Locate an edge or loose plank.
- For Floating Laminate:
- Remove Underlayment
- Peel back the Underlayment: Roll it up carefully if it is foam or plastic.
- Remove Fasteners: Use pliers to pull out nails, staples, or tacks securing the underlayment.
- Scrape off the Remaining Adhesive: Apply adhesive remover and scrape with a floor scraper if necessary.
- Clean and Inspect the Stairs
- Scrape Off Residue: Use a floor scraper or adhesive remover if any glue remains.
- Check for Damage: Look for cracks, dents, or uneven surfaces needing repair.
- Vacuum thoroughly: Remove dust and debris to ensure a smooth surface.
- Make Any Necessary Repairs: If necessary, fill holes with wood filler, sand down rough spots, or replace damaged stair parts.
